ok i wrote

Hi, I tried running Bars&Pipes that is currently in upload queue on Linux-hosted AROS. It seels linux-hosted has a host-midi driver so that it should work. The problem is that Bars&Pipes crashes immediately at start with following disassembly: [code] Dump of assembler code for function startfunctions: 0xe8f8678c <+0>: push %ebp 0xe8f8678d <+1>: mov %esp,%ebp 0xe8f8678f <+3>: push %edi 0xe8f86790 <+4>: sub $0x8,%esp 0xe8f86793 <+7>: mov $0xe9170760,%edx 0xe8f86798 <+12>: mov $0x225,%ecx 0xe8f8679d <+17>: mov $0x0,%eax 0xe8f867a2 <+22>: mov %edx,%edi 0xe8f867a4 <+24>: rep stos %eax,%es:(%edi) => 0xe8f867a6 <+26>: mov 0x4,%eax [/code] It looks like reading something from address 0x4, which on Amiga is I think SysBase, but this is not the case for AROS. Or AROS SysBase is automatically provided and there is no need to "read $4". Can you ask the author whether what I wrote here is true and if so to modify Bars&Pipes not to read from address 4?

do not have this error on my system Bars&Pipes works and also all USB class

Amiwell, you don't have the Guru because on your TinyAROS the folder "USB" (Classes/USB ) is not detected by Operating System, see screenshot The .class files are there in the USB folder, but TinyAROS does not detect them. Also on my AROS One if I disable the "USB" Folder I no longer have the Guru, this happens because Bars&Pipes does not detect the USB Drivers !!! --- Italiano --- Amiwell, tu non hai il Guru perchè sul tuo TinyAROS la cartella "USB" (Classes/USB) non viene rilevata da Sistema Operativo, vedi screenshot I file .class ci sono nella cartella USB, ma il TinyAROS non li rileva. Anche sul mio AROS One se disattivo la Cartella "USB" non ho più il Guru, questo accade perchè Bars&Pipes non rileva i Driver USB !!!

My Tiny Aros Archive https://drive.google.com/file/d/1SKOUYlQj41tMACFd6sJN4v05QUryLrtQ/view?usp=sharing

[quote name=Amiwell79 post=4583]@Amiwell79 - alfred wrote me this: Try this: -open a shell -cd to the BarsnPipes directory -start BarsnPipes with: BarsnPipes debug [/quote] After this step the Guru already appears, the debug data who should analyze it? I think only the developer can do it ! [quote] In BarsnPipes, drag the icon from the Quantize tool into the pipeline and drop it there. Double-click this icon in the pipeline. age [/quote] Where is the "Quantize" icon located ? what is "pipeline" ? If possible ask alfred which Distribution he used for Testing !

amigasystem should I zipper the entire system folder?

alfred wrote me this: Try this: -open a shell -cd to the BarsnPipes directory -start BarsnPipes with: BarsnPipes debug Normally any debug information is now printed. In BarsnPipes, drag the icon from the Quantize tool into the pipeline and drop it there. Double-click this icon in the pipeline. The window of the icon is opened. Leave the window open and click in the track window (title becomes red). Press the right AMIGA key and Q or select Quit in the menu. Requester -> Save? -> Press No If everything runs normally, a few debug messages will appear in the shell-window: " ..." "get entry for cowlist ..." at the end: "freelocalestrings Done" If this is not the case, please write me the last debug message.

@ Amiwell Even without Fonts TinyAROS goes in Guru, if you share your system we could check the differences. Question just avii small requests appear ! Question as soon as you run Bars&Pipes small requests appear ! --- Italiano -- Anche senza Fonts TinyAROS va in Guru, se condividi il tuo sistema potremmo verificare le differenze. Domanda appena esegui Bars&Pipes appaiono dei piccoli request !

Hi, Great that we can verify the same issue

I already had the necessary installed to run the programme I did not install the fonts and catalogues

Tested your TinyAROS is you get the same Guru, see screenshot You don't get Guru maybe because you have supported Hardware, or you didn't copy all the files in the SystemStuf folder, that's why I was asking the system you are using. --- Italiano --- Testato il tuo TinyAROS è si ottiene lo stesso Guru, vedi screenshot Tu non hai Guru forse perchè hai un Hardware supportato, oppure non hai copiato tutti i file della cartella SystemStuf, ecco perchè occorreva il sistema che stai utilizzando.

My system is Tiny Aros

Can you share your system (create a zip) it might help us to see if it is a hardware problem !

I don't have any equipment at the moment however I don't crash the program

let's hear Alfred's answer

The BarsnPipes output error also happens with the reference ISO, copied only the "SystemStuff" contents to the respective folders. Tested both Native PC and on VMware, did not use any midi devices and did not change anything in preferences !

I wrote to Alfred:)

Hi, Thanks, prefs deleted and recreated with usbmidi rather than poseidonusb of the previous prefs and changed the font to topaz but same barsnpipes Pipe Task error Icon "leave out" to desktop so can quick start the app No accessories yet and mergein and quantize tool but have not used yet It is possible it is my error as I have never used barsnpipes before

jeff you deleted the old configuration file thx