I am right now download icaros version 2.0 in 52 minutes it will be in my HD. My question, if I want to put this in memory stick and then install it from my memory stick to my main HD how do I go about doing that? Thanks in advance.

[quote][url=http://arosworld.org/forum/viewthread.php?thread_id=98&pid=587#post_587][b]magorium wrote:[/b][/url] Hi xboxown, Unfortunately i have little hands on experience with wifi, and i am also not aware of the availability of a step by step guide for setting up wireless. One thing you should be aware of (in case you haven't already) is that it is currently not possible to have more then 1 NIC active at the same time. according to [url=http://aros-exec.org/modules/newbb/viewtopic.php?viewmode=flat&type=&topic_id=8624&forum=1]what i've read[/url] wpa2 should not be a problem. Maybe [url=http://aros-exec.org/modules/newbb/viewtopic.php?post_id=72184#forumpost72184]ncafferkey's scanning tool[/url] can aid a little as well. Setting up wireless shouldn't be much different than configuring for wired, so the [url=http://www.icarosdesktop.com/icarosfiles/IcarosDesktop_manual.pdf]icaros desktop manual[/url] (chapter 4.4) might be helpful (just apply for wireless instead of wired). Also be aware that it sometimes takes a while for a network to connect (even for wired it sometimes takes 1-2 minutes for AROS to catch on and being able to detect all my network adapters/peripherals), sometimes wireless can behave even more slowly in that regards (so that might up being too impatient, even when you're doing everything ok). Please feel free to report/ask in case of troubles, that usually is easier for me to find an answer for than to try write a step by step guide for you (especially as i cannot check myself atm as i have no AROS wireless supported card available). Maybe you're in luck an someone else around is able to provide more information for you. In any way good luck and don't hesitate to ask for help when running into trouble. Please just try to mention what steps you took and what exactly is going wrong for you).[/quote] I downloaded the program from the link you send me and I even transferred it to my laptop and nothing happened. No sign of activity shows it worked and on top of that when I went into network prefs and clicked use nothing happened. No new user interface nothing and still could not connect to WiFi. Before I go further into this I want to install icaros 2.0 first then attempt WiFi.

Hi xboxown, Unfortunately i have little hands on experience with wifi, and i am also not aware of the availability of a step by step guide for setting up wireless. One thing you should be aware of (in case you haven't already) is that it is currently not possible to have more then 1 NIC active at the same time. according to [url=http://aros-exec.org/modules/newbb/viewtopic.php?viewmode=flat&type=&topic_id=8624&forum=1]what i've read[/url] wpa2 should not be a problem. Maybe [url=http://aros-exec.org/modules/newbb/viewtopic.php?post_id=72184#forumpost72184]ncafferkey's scanning tool[/url] can aid a little as well. Setting up wireless shouldn't be much different than configuring for wired, so the [url=http://www.icarosdesktop.com/icarosfiles/IcarosDesktop_manual.pdf]icaros desktop manual[/url] (chapter 4.4) might be helpful (just apply for wireless instead of wired). Also be aware that it sometimes takes a while for a network to connect (even for wired it sometimes takes 1-2 minutes for AROS to catch on and being able to detect all my network adapters/peripherals), sometimes wireless can behave even more slowly in that regards (so that might up being too impatient, even when you're doing everything ok). Please feel free to report/ask in case of troubles, that usually is easier for me to find an answer for than to try write a step by step guide for you (especially as i cannot check myself atm as i have no AROS wireless supported card available). Maybe you're in luck an someone else around is able to provide more information for you. In any way good luck and don't hesitate to ask for help when running into trouble. Please just try to mention what steps you took and what exactly is going wrong for you).

I purchased that laptop that is 100% compatible with icaros including wifi. My question is I am using telus and it is using security wpa2 with encryption aes and I don't know how to connect my icaros to wifi support? Thanks in advance. If there is a step by step guide to help me do this it would be sweet!

[quote][url=http://arosworld.org/forum/viewthread.php?thread_id=96&pid=580#post_580][b]cavemann wrote:[/b][/url] I use another partition for games and stuff. When I update the Os, I only format the system partition and not the partition with all the apps I want to keep. Or if you prefer, use an Usb stick for the system and only update it. Then use your internal drive for your own files.[/quote] No! :) I would rather very high speed boot up time and I want my icaros on a HD as it is my main and only OS I want installed in the HD. I will make three paritions. 1) Parition SYS: (4 GB) 2) Work: (20 GB) 3) Games (rest) Of course depending on the available space it will fluctuate to that.

I use another partition for games and stuff. When I update the Os, I only format the system partition and not the partition with all the apps I want to keep. Or if you prefer, use an Usb stick for the system and only update it. Then use your internal drive for your own files.

[quote][url=http://arosworld.org/forum/viewthread.php?thread_id=96&pid=577#post_577][b]magorium wrote:[/b][/url] In additional to cavemann's answer, some enthousiast did start a gamer website (called aros playground) [url=arosgamer.blogspot.com/]here[/url], but unfortunately most people are so busy that it hasn't been updated for quite a while now. As mentioned by cavemann some porters put their work up on their own websites, or upload them to the aros archives or aminet. In case you are serious about gaming and considering your quest for an icaros compatible laptop, be aware that when you are truly collecting aros games (and want to have them all installed) you have to take diskspace into account. especially bszili and sometimes serk concentrate on porting games that require a lot of diskspace for the game-data. So, a couple of GB's extras is required or at least can't hurt :) As a hint, my AROS gaming machine has more then 5 GB of games installed and that's only with games that i like to play more often.[/quote] Thank you for the heads up! Yes I am beyond serious! I want to fill up the HD with every single icaros game made for it or ported for it in existence. When new ones come up I will update more into the folder. So, yes I am serious. However, my concern since icaros is an going growing OS what would happen if say I have put 5 GB worth of games and then icaros 2.1 shows up, or icaros 2.4 shows up and so on, would that mean I have to redownload all these games again because I have to keep wiping HD? Can the new versions just be updated on the OS itself without affecting files and documents?

In additional to cavemann's answer, some enthousiast did start a gamer website (called aros playground) [url=arosgamer.blogspot.com/]here[/url], but unfortunately most people are so busy that it hasn't been updated for quite a while now. As mentioned by cavemann some porters put their work up on their own websites, or upload them to the aros archives or aminet. In case you are serious about gaming and considering your quest for an icaros compatible laptop, be aware that when you are truly collecting aros games (and want to have them all installed) you have to take diskspace into account. especially bszili and sometimes serk concentrate on porting games that require a lot of diskspace for the game-data. So, a couple of GB's extras is required or at least can't hurt :) As a hint, my AROS gaming machine has more then 5 GB of games installed and that's only with games that i like to play more often.

Most of the Aros (x86) games are at the Aros-Archive. They are separated into categories so you can choose the kind of games you like. It's updated about once a week. Many games are also at the web sites of the AROS porters Yannick, Bszili and SerkUK. Check out the ArosWorld web-links page for more info. I don't think there are any game reviews, but you can get info about some AROS games by going to the ArosWorld News Categories and look through the Games section. Good luck !

I am wondering is there a website or a blog that updates daily or almost daily that have hundreds of icaros games, reviews of games links to download games for icaros? I am going to buy that tiny laptop in a week or so and I want to install icaros 2.0 in it and I want to fill it up with so much games I can have fun with it in a bus or in car or anywhere I go. It will be like a mini portable console system :D :D :D ALSO I want to fill that laptop with lots of movies too!! YES! Also side, side, side note is there sticker I can buy that have icaros logo and icaros logo to put in the keyboard keys, etc?

[quote][url=http://arosworld.org/forum/viewthread.php?thread_id=65&pid=362#post_362][b]Cardboard_Sphinx wrote:[/b][/url] Hi again, Found I can move open windows with Graphire Tablet by pressing left Aros & left alt keys at same time and moving the pen above but not touching the surface, then releasing them. [/quote] Sounds like ordinairy mouse control with the keyboard to me. For example pressing the right amiga alt triggers the menu for me (so it acts like right mouse click). I'm unsure about the use/support for graphic tablets. I know some of them work, but do not know to what degree. It could perhaps be worth checking out trident (usb preferences) to see if you can map some of the tablet controls. But since i do not have any hw to check myself it could be that you are unable to. [quote]but I was wondering why Lua was Disabled? Is there anyway to enable it or would that require another build?[/quote] I have no idea. I suspect it requires a new build, but it could be just as well that something is not detecting lua properly. Better ask the porter/builder of the latest version (or ask nikolaos) [quote]A Few more questions I'm afraid...[/quote] Meaning you want to learn, so that's good :D [quote]I made a nice distinctive icon for XAMOS programs I've made called, "Def_xamos.info" which I put in, "AROS:Prefs/Env-Archive/SYS" But how do I make it the default Icon for displaying any file that ends in .xamos?[/quote] I might be wrong here, but as far as my memory goes this can only be done with so called project icon and when a datatype for xamos would be in place. The 'system' would then recognize it automatically. AROS itself gives no special meaning to filename extensions. Better check with someone else on this matter to make sure or dive into aros-exec.org posts [quote]Another thing, when I am using setpencolor to change some screen colors it seems to reverse the first 2 and last 2 characters in hexadecimal for the displayed color ie: to get FFFFE8 (a light sandy colour) one has to enter E8FFFF?[/quote] Correct. The setpencolor utility wants its colors in BBGGRR format (where every character is a hexadecimal nibble. B stands for blue component, R for red and G for green). It's old style amiga legacy (and hapilly annoys pc users) ;) [quote]also setpencolor says you can use R,G,B instead but I can't seem to get it to recognize R,G,B, for example c:setpencolor SCREEN="Workbench" PEN=5 COLOR=255,225,232 >NIL: or c:setpencolor SCREEN="Workbench" PEN=5 COLOR="255,225,232" >NIL: or c:setpencolor SCREEN="Workbench" PEN=5 COLOR=(255,225,232) >NIL: doesn't work.[/quote] Correct that it didn't work fro you. It's: SetPenColor R=80 G=100 B=100 or: SetPenColor R 80 G 100 B 100 But it has a caveat. It is not the actual R,G or B value but expressed in percentage. So a value 100 would mean 100%, corresponding with a value of $FF (or #255). This is because the function used to set the color this way, uses a 32 bit intensityvalue per color component (making a color value 96 bits wide, which is a bit overcomplicated to implement it, like you seem to expect now). [quote]One more thing, what fonts can I install so that iI can use them in programs like Annotate & Editor, since TTF fonts don't seem to show up in their requesters?[/quote] afaik you cannot. Editors like Annotate (that one i know best) expect non proportional fonts. TTF fonts are proportional (with few exceptions). If you really like to experiment with other fonts then i would suggest getting some (bitmapped fonts) from aminet [quote]Oh, and I still only get sound after a soft reboot.[/quote] Try removing or setting the query line in prefs (manually). More details on this can be found on aros-exec.org (as ncafferkey is the specialist concerning this kind of matters)

Hi again, Found I can move open windows with Graphire Tablet by pressing left Aros & left alt keys at same time and moving the pen above but not touching the surface, then releasing them. Installed the GrafX2 build from Aros Aspire (thanks cavemann) and it is indeed a more recent "Dragons Layers" edition which has layers and animation and seems to solve my endless backups problem, Program version:2.4.2035 Build options: TTF fonts Lua version: Disabled but I was wondering why Lua was Disabled? Is there anyway to enable it or would that require another build? A Few more questions I'm afraid... I made a nice distinctive icon for XAMOS programs I've made called, "Def_xamos.info" which I put in, "AROS:Prefs/Env-Archive/SYS" But how do I make it the default Icon for displaying any file that ends in .xamos? Another thing, when I am using setpencolor to change some screen colors it seems to reverse the first 2 and last 2 characters in hexadecimal for the displayed color ie: to get FFFFE8 (a light sandy colour) one has to enter E8FFFF? also setpencolor says you can use R,G,B instead but I can't seem to get it to recognize R,G,B, for example c:setpencolor SCREEN="Workbench" PEN=5 COLOR=255,225,232 >NIL: or c:setpencolor SCREEN="Workbench" PEN=5 COLOR="255,225,232" >NIL: or c:setpencolor SCREEN="Workbench" PEN=5 COLOR=(255,225,232) >NIL: doesn't work. One more thing, what fonts can I install so that iI can use them in programs like Annotate & Editor, since TTF fonts don't seem to show up in their requesters? Oh, and I still only get sound after a soft reboot. Thanks.

@Cardboard_Sphinx: [quote]I am using version 2.3.1781 and I seem to have understood what I did wrong in saving files...[/quote] It is a bit of a hassle, i agree. But the slash is automatically entered, so indeed it's a bit annoying. [quote]but it sill make backups which I can't figure out how to stop it from doing.[/quote] Currently my arosbox is down, so i would have to get back on that for you. As told before it does not make backups for me. Only thing i am able to tell right now is that there is an option in the settings that _looks_ like it is for automatic backups, but ain't. You need to dig a little deeper in the settings to turn that off (which i believe is off by default, but i am not sure). [quote]What I meant about it not being the latest version is that I have the one for mac which has animation.[/quote] Newer version almost always brings new features :-) [quote]I just thought someone would have compiled a newer version for Aros so it was up to date with other platforms. Is this difficult to do?[/quote] If porting (new features) would be (really) easy we would have had openoffice, Firefox, blender, etc already ;-) [quote]Otherwise Icaros seems quite refreshing. Quirky but refreshing.[/quote] Quircky indeed at times. Learn the quirks and you will be a happy person :D. Hopefully they will be addressed appropiately and in due time... [quote]I have found it recognizes my old usb wacom Graphire Tablet which works (probably without pressure) with one oddity... [/quote] That's very cool. Please try Cavemanns advise, although i have owned a tablet i currently don't anymore. afaik the internal handling of (pressure) tablets are not supported atm. [quote]One other program that I'm having trouble with is LodePaint which runs too slow to be usable am I doing something wrong here also or is it just my old PC?[/quote] As Cavemann wrote: lodepaint requires a suported videocard or a _very_ fast machine. It really isn't workable for me as well (as i lack either, 4GHZ does not seem to be enough). [quote]And I only get sound after a soft reboot, why is that?[/quote] No, idea tbh. Maybe you can look/search at the aros-exec forums to see if someone else reported similar issue(s) (most prefarably with the same hardware). Sometimes it helps to put the queury parameter in the settings. But that is a longshot. [quote]Thanks for your help.[/quote] No problem at all. Hopefully my answers are usefull, if not then just say so or verify with others ;) @Cavemann: Thanks for that intell, i didn't know that. I useually use AspireOS for some quick c-code related stuff and (modified) Icaros for the rest of my things.

Afaik, the only way to get GrafX 2.4 for Aros is from AspireOs. Icaros does not have the latest version. Lodepaint needs hardware acceleration to work well in Aros, and that probably means a supported NVidia card will do the trick. Of course, a beefy cpu wouldn't hurt. Also, have you tried to tap-drag to move windows like when using a laptop pad. Hope it works.

Hello, Magorium. I am using version 2.3.1781 and I seem to have understood what I did wrong in saving files... but it sill make backups which I can't figure out how to stop it from doing. What I meant about it not being the latest version is that I have the one for mac which has animation. I just thought someone would have compiled a newer version for Aros so it was up to date with other platforms. Is this difficult to do? Since the download for VAMP (good for animations which could be created in GrafX2) is not the latest version either. Otherwise Icaros seems quite refreshing. Quirky but refreshing. I have found it recognizes my old usb wacom Graphire Tablet which works (probably without pressure) with one oddity... I can't move open widows about, like the shell. I can use the scroll bars and gadgets on them I just can;t move them about. Any Ideas? One other program that I'm having trouble with is LodePaint which runs too slow to be usable am I doing something wrong here also or is it just my old PC? And I only get sound after a soft reboot, why is that? Thanks for your help.

hi Cardboard_Sphinx, First of all a very welcome :) Sorry to hear that grafx gives you so much grieve. I could not reproduce your backup-issue so quickly. Also grafx2 seems to save in the correct path for me. And i also can click the save button to do so. Which exact version of grafx2 does that to you ? I used version 2.3.1781 and that seems to work ok (at least for me). When you say you downloaded the latest recommended version from the grafx2 website, can you exactly tell which version that is (a link would be appreciated). Because the latest recommended version is the version number i mentioned (and i've used). I am not sure if you are doing something wrong or not. If i have to take a wild guess then perhaps you downloaded grafx2 for the wrong architecture/OS (or perhaps mistakenly did download a non recommended version) ? The AROS download page clearly states (for me that is, just to be sure :D) that 2.3.1781 is the latest stable (recommended) version, so i am a bit surprised that you mentioned a newer version being available for AROS.

Hi, I recently installed Icaros 1.5.2 on an old pc and have a little trouble with GrafX2 that came with the download. It continually makes backups even though I have changed the setting to no backup and more seriously never saves the pictures I've drawn in the directories I set in the save requester. It shows the path correctly but saves the file in the last directory it has loaded from. Also I cannot click the save button I can only enter the files name and then press return in order for it to save it. It is not the latest version which surprised me (it just has layers, no animation) but I tried downloading the latest recommended version for Aros from the GrafX2 site but it doesn't seem to run, when I click on it something flashes onto the screen and promptly closes. Am I just doing something wrong?

Hi cavemann ltns, hope all is ok. While being on the subject, yesterday someone reported having problems on irc as well (trans?) so i downloaded 1.5.2 again and i also had no problems. Downloaded cd using AROS :D and windows for the DVD (was not sure it would fit aros).

@trans I recently downloaded Icaros1.5.2 and had no speed problem. I was at a public wifi hotspot again using Windows with a proxy. I double checked and it was not a torrent and it came directly from the Icaros site. Do you have speed problems with any other downloads?

Just finished downloading it. It took around 24 hrs avg. ~20KB/s. Think I will seed it as a torrent, for a while, maybe a bunch of us can make a habbit of it?