Hi,

Yes, with the V155 it is the same as the last iso, get to the aros banner and acpi tables but after that changes to blank screen and stays there but this time with constant flashing led on usb stick, it is possible I have to wait a very very long time to boot into Aros?

Yes, 7010 boot ok with usb2 slot and option A.

V155 - no I don't think so. You should at least see two lines from xHCI -> one describing ports you have and the other showing the interrupt that was assigned to xHCI. If they are not showing, then something else is still not working correctly on your config.

Hi,

See these lines about ports and interrupt on both machines so I suspect like the 7010 it does not detect the filesystem on the usb and so the V155 keeps flashing led trying to it find it. Would this be the problem?

Hard to say, but I guess it's some sort of edge case that I didn't detect on my hardware. Try this: boot option C on DELL 7010 and insert a FAT pendrive into USB3 slot. Is the pendrive mounted? If yes, run 'psddevlister topology' from Shell. Is the disk assigned to Superspeed root hub? If yes, then the problem most likely is some edge case scenarion. I have one AMD machine and maybe when I got it to work, it will also fix your issues.

Hi

Picture trying to take during startup of V155, will try the above

Dell 7010, stick in usb3 not detected.

7010 error list

01/01/78 0:00 am| 0-poseidon.library: Welcome to $VER: poseidon.library 5.3 (16.4.2026) Copyright 2002-2009 Chris Hodges, 2009-2026 The AROS Dev Team (0000000020090807)!
01/01/78 0:00 am| 0-poseidon.library: This is the AROS port.
01/01/78 0:00 am| 0-poseidon.library: Event broadcaster started.
01/01/78 0:00 am| 0-poseidon.library: Say hello to hub.class V4.3 (Root/external hub base class).
01/01/78 0:00 am| 0-poseidon.library: Whoah! massstorage.class V5.0 surprised as Supports storage devices via usbscsi.device.
01/01/78 0:00 am| 0-poseidon.library: New hardware pciusb.device/0 added (PCI OHCI/EHCI USB 2.0 Host Controller).
01/01/78 0:00 am| 0-poseidon.library: Device 'PCI Root Hub Unit 0' says it is currently bus-powered. Fixing config.
01/01/78 0:00 am| 0-poseidon.library: Root hub has been enumerated.
01/01/78 0:00 am| 0-poseidon.library: New hardware pciusb.device/1 added (PCI OHCI/EHCI USB 2.0 Host Controller).
01/01/78 0:00 am| 0-poseidon.library: Device 'PCI Root Hub Unit 1' says it is currently bus-powered. Fixing config.
01/01/78 0:00 am| 0-poseidon.library: Root hub has been enumerated.
01/01/78 0:00 am| 0-poseidon.library: New hardware pciusb.device/2 added (PCI OHCI USB 1.1 Host Controller).
01/01/78 0:00 am| 0-poseidon.library: Device 'PCI Root Hub Unit 2' says it is currently bus-powered. Fixing config.
01/01/78 0:00 am| 0-poseidon.library: Root hub has been enumerated.
01/01/78 0:00 am| 0-poseidon.library: New hardware pciusb.device/3 added (PCI OHCI/EHCI USB 2.0 Host Controller).
01/01/78 0:00 am| 0-poseidon.library: Device 'PCI Root Hub Unit 3' says it is currently bus-powered. Fixing config.
01/01/78 0:00 am| 0-poseidon.library: Root hub has been enumerated.
01/01/78 0:00 am| 20-poseidon.library: Opening pciusb.device unit 4 failed device/unit failed to open (-1).
01/01/78 0:00 am| 0-poseidon.library: The door bell rang for hubss.class V4.3 (Root/external superspeed hub base class).
01/01/78 0:00 am| 0-poseidon.library: New hardware pcixhci.device/0 added (PCI xHCI 0.9 USB 3.0 Host Controller).
01/01/78 0:00 am| 0-poseidon.library: Device 'PCI Superspeed Root Hub Unit 0' says it is currently bus-powered. Fixing config.
01/01/78 0:00 am| 0-poseidon.library: SuperSpeed root hub has been enumerated.
01/01/78 0:00 am| 20-poseidon.library: Opening pcixhci.device unit 1 failed device/unit failed to open (-1).
01/01/78 0:00 am| 0-hub.class: Hub with 5 ports successfully configured.
01/01/78 0:00 am| 0-hub.class: I'm in love with hub 'PCI Root Hub Unit 0'.
01/01/78 0:00 am| 0-hub.class: Hub with 5 ports successfully configured.
01/01/78 0:00 am| 0-hub.class: I'm in love with hub 'PCI Root Hub Unit 1'.
01/01/78 0:00 am| 0-hub.class: Hub with 2 ports successfully configured.
01/01/78 0:00 am| 0-hub.class: I'm in love with hub 'PCI Root Hub Unit 2'.
01/01/78 0:00 am| 0-hub.class: Hub with 4 ports successfully configured.
01/01/78 0:00 am| 0-hub.class: I'm in love with hub 'PCI Root Hub Unit 3'.
01/01/78 0:00 am| 0-hubss.class: Hub with 4 ports successfully configured.
01/01/78 0:00 am| 0-hubss.class: I'm in love with superspeed hub 'PCI Superspeed Root Hub Unit 0'.
01/01/78 0:00 am| 0-hub.class: Detected device 'TransMemory' at port 1. I like it.
01/01/78 0:00 am| 0-hub.class: Hub has added 1 device(s). That'll be fun!
01/01/78 0:00 am| 0-massstorage.class: Postconfig patchflags 0x0342 ModeXLate FixInq36 SimpleSCSI NoReset.
01/01/78 0:00 am| 0-massstorage.class: MSD 'TransMemory' LUN 0 available through usbscsi.device unit 0!
01/01/78 0:00 am| 0-massstorage.class: Device 'TransMemory' is of Direct Access type.
01/01/78 0:00 am| 0-massstorage.class: Removable Task started.
01/01/78 0:00 am| 0-poseidon.library: Device 'USB 2.0 Hub' says it is currently bus-powered. Fixing config.
01/01/78 0:00 am| 0-hub.class: Detected device 'USB 2.0 Hub' at port 1. I like it.
01/01/78 0:00 am| 0-hub.class: Hub has added 1 device(s). That'll be fun!
01/01/78 0:00 am| 0-hub.class: Hub with 4 ports successfully configured.
01/01/78 0:00 am| 0-hub.class: I'm in love with hub 'USB 2.0 Hub'.
01/01/78 0:00 am| 0-hub.class: Detected device 'USB Wireless HID Receiver' at port 2. I like it.
01/01/78 0:00 am| 0-Poseidon Early ROM Init: Delaying further execution by 4 second(s) (boot delay).
01/01/78 0:00 am| 0-hub.class: Detected device 'Wireless Receiver' at port 4. I like it.
01/01/78 0:00 am| 0-hub.class: Hub has added 2 device(s). That'll be fun!
01/01/78 0:00 am| 0-poseidon.library: Welcome hid.class V4.5 (Generic support for human interface devices) to the party.
01/01/78 0:00 am| 5-hid.class: Using AROS IND_ADDEVENT workaround to fix some mouse & keyboard problems.
01/01/78 0:00 am| 5-hid.class: SET_IDLE=0 failed: endpoint stall (4)!
01/01/78 0:00 am| 0-hid.class: Using HID Descriptor from initial configuration run.
01/01/78 0:00 am| 0-hid.class: HID the road, 'USB Wireless HID Receiver'!
01/01/78 0:00 am| 5-hid.class: Using AROS IND_ADDEVENT workaround to fix some mouse & keyboard problems.
01/01/78 0:00 am| 0-hid.class: Using HID Descriptor from initial configuration run.
01/01/78 0:00 am| 0-hid.class: HID the road, 'USB Wireless HID Receiver'!
01/01/78 0:00 am| 5-hid.class: Using AROS IND_ADDEVENT workaround to fix some mouse & keyboard problems.
01/01/78 0:00 am| 0-hid.class: Using HID Descriptor from initial configuration run.
01/01/78 0:00 am| 0-hid.class: HID the road, 'Wireless Receiver'!
01/01/78 0:00 am| 5-hid.class: Using AROS IND_ADDEVENT workaround to fix some mouse & keyboard problems.
01/01/78 0:00 am| 0-hid.class: Using HID Descriptor from initial configuration run.
01/01/78 0:00 am| 0-hid.class: HID the road, 'Wireless Receiver'!
0:30 am| 0-poseidon.library: Don't laugh at serialcp210x.class V4.3 for CP210x serial adapter via serialcp210x.device.
0:30 am| 0-poseidon.library: Time has come for serialpl2303.class V4.3 (PL2303 serial adapter via serialpl2303.device) to join the show.
0:30 am| 0-poseidon.library: Start blaming simplemidi.class V4.3 for helping at Simple MIDI-IN Stream class mapping to keyboard.
0:30 am| 0-poseidon.library: Ain't stir4200.class V4.3 useful for IrDA Bridge for STIr4200 chipsets via usbstir4200.device?
0:30 am| 0-poseidon.library: Say hello to usbaudio.class V4.3 (USB Audio Streaming Interface class).
0:30 am| 0-poseidon.library: Whoah! felsunxi.class V0.1 surprised as Support for Allwinner FEL mode.
0:30 am| 0-poseidon.library: The door bell rang for moschipeth.class V4.3 (Ethernet SANA driver for MosChip MCS7830 chipset via usbmoschipeth.device).
0:30 am| 0-poseidon.library: Welcome palmpda.class V4.3 (Palm PDA HotSync via usbpalm.device) to the party.
0:30 am| 0-poseidon.library: Don't laugh at pegasus.class V4.3 for Ethernet SANA driver for Pegasus chipsets via usbpegasus.device.
0:30 am| 0-poseidon.library: Time has come for printer.class V4.3 (Bidirectional printer driver via usbparallel.device) to join the show.
0:30 am| 0-poseidon.library: Start blaming ptp.class V4.3 for helping at Support for DigiCams and MTP via PictureTransferProtocol (PTP).
0:30 am| 0-poseidon.library: Ain't rawwrap.class V4.3 useful for Simple USB bulk IO wrapper via usbraw.device?
0:30 am| 0-poseidon.library: Say hello to rndis.class V1.2 (Ethernet SANA wrapper for RNDIS devices via usbrndis.device).
0:30 am| 0-poseidon.library: Whoah! asixeth.class V4.3 surprised as Ethernet SANA driver for ASIX chipsets via usbasixeth.device.
0:30 am| 0-poseidon.library: The door bell rang for bluetooth.class V4.3 (Bluetooth HCI via usbbluetooth.device).
0:30 am| 0-poseidon.library: Welcome bootkeyboard.class V4.5 (Support for keyboards in boot protocol mode) to the party.
0:30 am| 0-poseidon.library: Don't laugh at bootmouse.class V4.4 for Support for mice/tablets in boot protocol mode.
0:30 am| 0-poseidon.library: Time has come for camdusbmidi.class V4.5 (USB MIDI CAMD Interface class) to join the show.
0:30 am| 0-poseidon.library: Start blaming cdcacm.class V4.3 for helping at USB modems and OBEX via usbmodem.device.
0:30 am| 0-poseidon.library: Ain't cdceth.class V5.0 useful for Ethernet SANA driver for CDC Ethernet devices via usbcdceth.device?
0:30 am| 0-poseidon.library: Say hello to dfu.class V4.3 (Firmware Upgrading/Downloading).
0:30 am| 0-poseidon.library: Whoah! dm9601eth.class V4.3 surprised as Ethernet SANA driver for Davicom chipsets via dm9601eth.device.
0:30 am| 0-poseidon.library: The door bell rang for egalaxtouch.class V4.3 (Support for eGalax Touchscreens).
0:30 am| 0-poseidon.library: Welcome ethwrap.class V4.4 (Ethernet SANA wrapper for simple devices via usbethwrap.device) to the party.
1:30 pm| 5-poseidon.library: Failed to find config file 'ENV:Sys/poseidon.prefs'!
1:30 pm| 5-poseidon.library: Failed to find config file 'ENVARC:Sys/poseidon.prefs'!
1:30 pm| 0-poseidon.library: PoPo kicks ass.
1:30 pm| 0-massstorage.class: DOS found, stopping removable task...
1:30 pm| 0-massstorage.class: Removable Task stopped.
1:30 pm| 0-massstorage.class: Removable Task started.
1:30 pm| 5-hubss.class: Disabling port 2.
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:30 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:31 pm| 5-poseidon.library: Failed to find config file 'ENV:Sys/poseidon.prefs'!
1:31 pm| 5-poseidon.library: Failed to find config file 'ENVARC:Sys/poseidon.prefs'!
1:31 pm| 5-Trident: Forcing a DirScan for (new) classes, as you probably updated to a newer version.
1:31 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:31 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:31 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:31 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:31 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:31 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:31 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:31 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:31 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:32 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:32 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:32 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:32 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:32 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:32 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:32 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:32 pm| 10-hubss.class: Wrong port status 0101 for port 4!
1:32 pm| 10-hubss.class: Wrong port status 0101 for port 4!

Ok, I see something here that is suspicious. Do you have any other USB devices plugged in? If yes, then remove them. If no, then somehow your device was detected as low speed and this causes the error as the devices trasmitted more data than it "should". The pendrive that you are using - is it USB2 or USB3 pendrive? Can you try another pendrive?

DELL 7010 -> Looks like there is still some bug in the code that this specific chipset is hitting or that chipset needs to special handling. Don't have any hardware right now that behave like that.

I installed the USB3 card, it works but it does not boot, thanks

Hi,

I have an unpowered usb2 hub with wireless dongles on which I removed. Dell 7010, tried again with another usb3 drive, booted iso in dvd drive, install to usb3, all OK. Boot with usb3 flash drive in usb3 port, assigned ports and ints but afterwards waiting on media so will not boot to Wanderer.

Ok, then at least we know that it's the initial phase that is causing issues. Try one more thing (DELL 7010). Boot with usb3 flash drive in usb3 port and add bootdelay=10 kernel argument in grub. Maybe some more delay is needed for AROS to be able to read partitions on this machine.

Hi,

Long pause and then waiting for bootable media screen

I can confirm that selecting USB2 in Grub gives the same result as USB3

@Jeff1138

Then there has to be something else. I'll let you know if I came across similar issue and fix it.