[quote name=ntromans post=9575]
The image was created as you outline - the hard drive was hooked up via a USB to SATA adapter. The image was written correctly as I can boot with issue using this hard drive (in the SATA interface) on my i5 machine. As mentioned, I was just hoping I could get the ACER running AROS as I'm hoping at some point to make it into a tablet format (the keyboard is damaged but it has a good size screen which I can source a 4-wire resistive overlay for).
Cheers,
Nigel.[/quote]
Underneath AROS Portable is Ubuntu, which runs Qemu. If it does not boot, it means that the hardware is not compatible with this Ubuntu.
I tried both versions of the distribution and both error out with a flashing screen that reads "Reset System". I am using an HP laptop that currently runs Windows 11. Any ideas on how to fix this?
This appears to be a known issue with Ubuntu and some HP laptops:
https://askubuntu.com/questions/1417217/reset-system-boot-loop-after-installing-ubuntu-22-04-lts-on-hp-probook
Unfortunately, I don't have HP hardware to test it myself. If you find a way to make Ubuntu work, AROS Portable should work too.
I installed Aros Portable on my HP ENVY i7, where it loaded in no time. I also updated AROS One to version 1.2 + all the new updates, including Amiberry. The only problem is that the network doesn't work. It doesn't work with pcnet32.device. Which device should it work with?
The ‘Settings Wifi’ app is nice. If you give me your consent, I will include it in the next AROS One!
[url=https://www.arosworld.org/infusions/forum/index.php?viewforum&forum_id=16][b]AROS One All Thread[/b][/url]
[url=https://sites.google.com/view/arosone][b]AROS One Home Site[/b][/url]
[url=https://www.facebook.com/profile.php?id=100095334408019][b]AROS One Facebook[/b][/url]
I installed Aros Portable on my HP ENVY i7, where it loaded in no time. I also updated AROS One to version 1.2 + all the new updates, including Amiberry. The only problem is that the network doesn't work. It doesn't work with pcnet32.device. Which device should it work with?
The ‘Settings Wifi’ app is nice. If you give me your consent, I will include it in the next AROS One![/quote]
It should only work with pcnet32.device (as set by default). Did the internet not work from the beginning, or only after you installed the updates?
The ‘Settings Wifi’ app has no use outside of the AROS Portable environment. It is integrated with the Linux settings.
BTW. When you release a new version of AROS One, I will prepare an AROS Portable image with the current version.
pcnet32.device did not work even before the update. On the same PC running Windows with QEmu, pcnet32.device works fine, so the problem is on the Linux side.
Regarding the new AROS One v1.3, it will be distributed as soon as a Core update is available and EmuV0 is a full version.
In the new AROS One, there will be a folder named 32Bit in Extras where you can simply click on the programme icon, while in the Emulator folder there will be Amiberry, which can also be run from the BoingIconBar as shown in the attached video.
https://www.youtube.com/watch?v=9U2-rTPTrsE
Regarding video resolutions, have you tried setting up VMware drivers? They work well on QEMU Windows!
[url=https://www.arosworld.org/infusions/forum/index.php?viewforum&forum_id=16][b]AROS One All Thread[/b][/url]
[url=https://sites.google.com/view/arosone][b]AROS One Home Site[/b][/url]
[url=https://www.facebook.com/profile.php?id=100095334408019][b]AROS One Facebook[/b][/url]
I've hit a bit of a prolbem trying to use Portable AROS - any help would be much appreciated!
I've just had an ASUS laptop passed on to me which I'd like to use for work instead of my 32 bit Samsung. What would be particularly useful would be it's touchscreen for use with my whiteboard program. Native AROS will not boot on the machine due it not supporting legacy boot but Portable AROS will.
The trackpad works fine - tracks finger presses with the pointer moving as expected. However, the touchscreen does not; the pointer does move to the position touched, but on swiping the finger (sttill pressing the screen) the pointer does not follow. It looks like both touchpad and touchscreen are handled using QEMU's usb-tablet device which is passing though data as though from a mouse. This would be absolutely fine except looking in Trident prefs I can see the x and y coordinates are not being updated as a finger is swiped acorss the screen, only when it's lifted off and then touched to the screen again.
I don't think this is an issue on the AROS side but rather with the Linux base or QEMU. Any suggestions on how the touchscreen could be made to give updated coordinates with fnger swipes would be really helpful.
Cheers,
Nigel.
P.S. I've tried adjusting the Trudent mouse settings for this device (absolute vs relative etc.) but with no luck.
Edited by ntromans on 26-07-2026 12:27, 12 days ago
Unfortunately, I don't have any device with a touchscreen. But what you can do is install QEMU on Linux, run AROS in it, and see if any QEMU option supports your touchscreen.
You can view all discussion threads in this forum. You cannot start a new discussion thread in this forum. You cannot reply in this discussion thread. You cannot start on a poll in this forum. You cannot upload attachments in this forum. You can download attachments in this forum.
AMIGASYSTEMDistro Maintainer